The XterraWave™ XW1900 1900 MHz (PCS) In-building Repeater extends cellular services into buildings and other poor coverage areas. The XW1900 Repeater is designed for use with cellular telephones (1900 MHz PCS band) and offers a cost-effective solution for small business and residential applications. The repeater is useful in areas where cellular service is available outside of the building and is marginal indoors.
The repeater is a network-compatible device that amplifies cellular signals in both the uplink and downlink directions. The repeater is simple to install, and contains circuitry to ensure proper operating power levels, and as well, includes automatic low isolation and detection circuitry that detects low isolation between the indoor and outdoor antennas. In this condition, the repeater will adjust its gain to compensate for the abnormality, and warn the user through an indicator LED. The XW1900 Repeater will enhance the cellular telephone user's experience while complying with cellular network specifications. The repeater will also work with wireless PDAs (Wireless Digital Assistants) and laptop personal computers with wireless PC cards. Linear operation is guaranteed under all conditions.
The XW1900 Repeater allows up to two indoor antennas to be used without the need of external components. Its auxiliary indoor antenna port allows a second indoor zone to be easily connected. The repeater can be battery-backed, by connecting the repeater's 12VDC supply to a backup power supply .
|RF Specifications||General Specifications|
|1850-1910||1930-1990||Power Requirements||120V AC adapter included. (1000mA @ 12V) For battery back-up, third party back-up system must be +12VDC, 8 Amp-Hours min (for 8 hours operation on battery)|
|Output Power (dBm)||+23||+15||Operating Temperature Range||-40 to +60°C (-40 to 140°F)
Indoor use only.
|Maximum Gain (dB)||60||60||Dimensions (without RF connectors)||165mm L x 152mm W x 33mm H (6.50" L x 5.98" W x 1.30" H)|
|Low Isolation Detection||Amber LED indication for low isolation betwen indoor/outdoor antennas.||Net Weight||1.36 kg (3 lbs)|
|Maximum Possible Exposure (MPE)||At inside antenna port, exposure to non-ionizing radiation meets or exceeds permissable FCC MPE specifications.||RF Connectors||TNC Female|
|150||Recommended Indoor Antenna||3 dBi ceiling mount omni-directional|
|Gain Flatness (dB)||+/- 3||Recommended Outdoor Antenna||Yagi directional antenna|
|Noise Figure (dB)||< 6||Included Accessories||120V AC adapter|
|Optional Accessories||Battery back-up interface cable|
|Specification Download PDF|
|Installation Manual Download PDF|
|Go to Support section for answers to Frequently Asked Questions (FAQ).|
|Go to Xterrawave.com web site|