Description |
Components |
||||
The XN96010 SOHO 850 MHz Cellular Coverage System is a cost-effective, high quality signal enhancement solution for indoor environments. The system provides typical in-building wireless coverage of 5,000 to 10,000 sq. ft. for 850 MHz cellular wireless communication. This is a complete solution for Small Office / Home Office (SOHO) environments that lack sufficient wireless signal strength for voice and data communications. The single coverage zone may be expanded with additional equipment. (not included) Features
|
A - 850 MHz 9 dBi Yagi Antenna B - 10 ft N-N Connectorized Cable C - 90V N-N Female Lightning Arrestor D - 10 ft N-TNC Connectorized Cable E - 850 MHz Cellular 60 dB In-building Repeater F - 50 ft N-TNC Connectorized Cable G - 850 MHz 8 dBi Indoor Panel Antenna |
||||
| RF Specifications | General Specifications | ||||||
| Uplink | Downlink | ||||||
Frequency Range |
824-849 | 869-894 | Power Requirements | 120V AC adapter included. (500mA @ 12V) For battery back-up, third party back-up system must be +12VDC, 8 Amp-Hours min (for 8 hours operation on battery) | |||
Output Power (dBm) |
+19 | +23 | Operating Temperature Range | -40 to +60°C (-40 to 140°F) Indoor use only. |
|||
| Maximum Gain (dB) (includes antennas) |
64 | 64 | Dimensions (In-building Repeater) | 165mm L x 152mm W x 33mm H (6.50" L x 5.98" W x 1.30" H) | |||
| Low Isolation Detection | A flashing green LED will indicate low isolation between indoor and outdoor antennas | Net Weight | 6.8 kg (15 lbs) | ||||
| Maximum Possible Exposure (MPE) | Exposure to non-ionizing radiation meets or exceeds permissible FCC-mandated MPE Specification at indoor antenna port | ||||||
| Group Delay (nS typical) |
150 | ||||||
| Gain Flatness (dB) | ± 3 | ||||||
| Noise Figure (dB) | < 6 | ||||||
Specification |
||
| Go to Xterrawave.com web site | ||
| Part No | Weight | Price | ||||||
| XN96010 | 15 lbs | $1,399.00 | ||||||