In-building Coverage Systems

XterraWave™ XN96035
800 MHz In-building Coverage System
Single Zone Omni-directional

Description

Components

The XN96035 800 MHz iDEN (Nextel) Single Zone Coverage System is a cost-effective, high quality signal enhancement solution for indoor environments. The system provides typical in-building wireless coverage of 25,000 sq. ft. (50,000 sq. ft. free space) for 800 MHz iDEN wireless communication. This is a complete solution for enclosed environments that lack sufficient wireless signal strength for voice and data communications.


The single coverage zone may be expanded with additional equipment. (not included)


Features


  • Easy Installation - no calibration required,

  • Typical 25,000 sq. ft. (50,000 sq. ft. free space) coverage,

  • Automatic Low Isolation Detection and Indication Circuitry,

  • Auto levelling circuitry ensures linear operation,

  • Network-compatible operation,

  • Auxiliary in-building antenna port can provide enhanced coverage,

  • FCC and Industry Canada approved,

  • Can be connected to battery back-up system for emergency powering,

  • Expand coverage area with additional equipment (not included).


A - 800 MHz 9 dBi Yagi Antenna
B - 10 ft N-N Connectorized Cable
C - 90V N-N Female Lightning Arrestor
D - 10 ft N-TNC Connectorized Cable
E - 800 MHz iDEN (Nextel) 60 dB In-building Repeater
F - 50 ft N-TNC Connectorized Cable
G - 800 MHz 3 dBi Indoor Dome Antenna
RF Specifications General Specifications
Uplink Downlink

Frequency Range
(MHz)

 806-825 851-870 Power Requirements 120V AC adapter included. (500mA @ 12V) For battery back-up, third party back-up system must be +12VDC, 8 Amp-Hours min (for 8 hours operation on battery)

Output Power (dBm)
(max - at antennas)

 +29 +16 Operating Temperature Range -40 to +60°C (-40 to 140°F)
Indoor use only.
Maximum Gain (dB)
(includes antennas)		 67 67 Dimensions (In-building Repeater) 165mm L x 152mm W x 33mm H (6.50" L x 5.98" W x 1.30" H)
Low Isolation Detection A flashing green LED will indicate low isolation between indoor and outdoor antennas Net Weight 7.3 kg (16 lbs)
Maximum Possible Exposure (MPE) Exposure to non-ionizing radiation meets or exceeds permissible FCC-mandated MPE Specification at indoor antenna port
Group Delay
(nS typical)		 150
Gain Flatness (dB) ± 3
Noise Figure (dB) < 6

Specification    Download PDF
Go to Xterrawave.com web site
Part No Weight Price
XN96035 16 lbs $1,399.00
© 2006-2010 Xterra Wireless Inc. All Rights Reserved.